PYLE Audio PLDVD92 Mechanical Installation, Electrical Connection, Direct Connect with a TV

INSTALLATION

Install your DVD player on a stable flat surface. There must be sufficient space in front of the player for the drawer to be opened. Don’t expose your player to extremes of temperature or humidity. Avoid standing it on a hot surface such as on top of other hot running equipment and ensure that there is adequate ventilation to the player.

MECHANICAL INSTALLATION

Install step showing on as following figure. You can use screws or magic tapes to fix your unit.

Hexagonal bolt (M6 x 20) 4pcs

Tapping screw (M5x12) 4pcs

Bracket 2pcs

Sponge 2pcs

Magic Tape

(3 pcs)

DVD

Player

Protective Pad

Tighten the screw

4pcs

Step 1 (Method A)

Step 1 (Method B)

Step 2

Step 3

ELECTRICAL CONNECTION

1.DIRECT CONNECT WITH A TV

Only connect the Audio cable and Video cable to your TV. Show on as Fig. 1.

Fix the remote control receiver with magic tape on the proper position and it can “see” the remote control.

TV

A/V CABLE

Fig. 1

DVD PLAYER

SERIAL NO

Cigarette Lighter

Magic Tape

Remote control receiver

2.HOME THEATRE CONNECTION

Connect the video socket on the DVD to your TV. Do not connect the L-R Audio socket to the TV, or if the L-R connections are made, you need to set the TV volume control to zero. Show on as Fig. 2. Connect the digital audio out socket on the DVD to the digital input socket of your 5.1 channel receiver/amplifier.

TV			5.1 CH.RECEIVER
		DIGITAL AUDIO
		Front	Front
		Speaker	Speaker
		(Left)	(Right)
	A/V CABLE
DVD PLAYER			Centre
			Speaker
			Sub woofer
SERIAL NO
	Magic Tape	Rear Speaker	Rear Speaker
		(Left Surround)	(Right Surround)
Cigarette Lighter	Remote control receiver
		7

Fig. 2