OPERATION
•SWITHCHING ON/OFF THE UNIT
Switch on the unit by pressing any button. When system is on, press 
button (1) to turn off the unit.
•SOUND ADJUSTMENT
Press SEL button (3) shortly to select the desired adjustment mode.
The adjustment mode will change in
the following order:
| VOL |
|
|
| BAS |
|
|
| TRE |
|
|
| BAL |
|
|
| FAD |
|
| (Volume) |
|
| (Bass) |
|
| (Treble) |
|
| (Balance) |
|
| (Fader) | |||||
|
|
|
| |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
By rotating the audio knob (3) it is possible to adjust the desired sound quality.
•LOUDNESS
Press BND/LOU button (4) for several seconds to reinforce the bass output. Press it for several seconds again to release this function.
•DISPLAY
Exhibit current frequency and activated functions on the display (6).
•AUXILIARY INPUT
This unit can be connected to a portable audio player through the AUX IN jack (13).
•MUTE
Press to mute the sound, press it (8) again to resume the sound.
•EQUALIZATION
Press EQ button (7) to turn on equalization function and to select desired audio mode. There are five kinds of mode as below:
FLAT
CLASSICS
POP M
ROCK M
DSP OFF
•REMOTE SENSOR
Point the remote cantrol handset to the remote sensor IR (5). Press the function keys on the handset to control the system.
•RESET FUNCTION
RESET button (25) must be activated with either a ball point pen or thin metal object. The RESET button is to be activated for the following reasons:
-Initial installation of the unit when all wiring is completed.
-All the function buttons do not operate.
-Error symbol on the display.
Note: If press RESET button (25), the unit can’t work yet, please use a cotton swab soaked in isopropyl alcohol to clean the socket on the back of the front panel.
RADIO OPERATION
•SWITCHING TO RADIO MODE Press MODE button (11) shortly to select radio mode, the radio mode appears in the display together with the memory band and frequency.
•SELECTING THE FREQUENCY BAND
At radio mode, press BND/LOU(ENT) button (4) shortly to select the desired band.
The reception band will change in the following order:
FM1
FM2
FM3
AM 
•SELECTING STATION
Press 
button (2) or 
button (24) shortly to activate automatic seek function. Press for several seconds until “MANUAL” appears on the display, the manual tuning mode is selected. If both buttons have not been pressed for several seconds, they will return to seek tuning mode and “AUTO” appears on the display.
•AUTOMATIC MEMORY STORING & PROGRAM SCANNING
- Automatic Memory Storing
Press AS/PS button (10) for several seconds, the radio searches from the current frequency and checks the signal strength until one cycle search is finished. And then 6 strongest stations are stored into the corresponding preset number button. - Program Scanning
Press AS/PS button (10) shortly to scan preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for several seconds with releasing mute, then searches again.
8
