REMOTE CONTROL BATTERY

Back of the remote

Battery tank

Battery

Transparent slice

1.Always use new batteries when replacing the old set .

2.Do not attempt to charge ,short-circuit ,disassemble ,heat or burn used batteries.

3.Battery replacement is necessary when remote control acts sporadically or stops operating this device.

4.Do not place objects between the remote control and remote receiver. 5.If the monitor does not operate even when operating the remote control from a colse rangre ,it is time to replace the batteries

Product number :(cr2025)

INSTALLATION

The device is an overhead ,fold-down 13 inch monitor with an infrared

ir eye .It will accept a video signal from any video source with composite videout .

1.Look over the vehicle for a location for the monitor .Each vehicle is different and locations will vary .Make sure the monitor will not interfere with the driver.

2.Once a location has been determined ,connect the IR ,A/V RCAs and Powercables to the designated sources.

3.Feed the cables through the hole in the mounting bracket and screw the bracket to the head liner ,Use short screws so as not to damage the roof.

4.Plug the cable into the monitors 6 pin din connector .Mount the monitor with the provided hardware.

Thank you for the purchase of this roof mounting 13inch TFT-LCD monitor .Before operating the unit ,please read this manual thoroughly and keep it for future reference.

PREAUTIONS

The set is for use in DC12V ,negaive ground vehicles.

Do not operate the set in ways other than described in this guide .Doing so may damage it and may void your warranty.

SAFETY FIRST FOR REAR SEAT USE ONLY .Do not install on dashboard or any where else that would permit monitor to be viewed by the driver . Monitor must never be used in any manner that will distract driver or interfere with the drivers

safe operation of the monitor vehivle.

Be careful not to run down the car battery while using the set with the

car stopped.Do not disassemble or modify the set .Doing so may damage it and voids your warranty.

Keep drinks and drops from numberllas away from the set .Water may damage the internal circuitry.

Do not let the set become hot .If temperature in the car is high or the

set has been exposed to direct sunlight and is hot ,lower the temperature before using it .In extremely cold temperature ,the movement of the picture may be slow and the picture may be dark ,but this is not a malfunction .The set will work normally once the temperature increases.

4

1

Page 1 Page 3
Page 2
Image 2
PYLE Audio PLVW1342 specifications Remote Control Battery, Installation, Preautions
Page 1 Page 3

PLVW1342 specifications

The PYLE Audio PLVW1342 is a versatile and vibrant 13.3-inch flip-down monitor designed for in-car entertainment. Known for its sleek design and array of features, this monitor enhances the viewing experience for passengers, making long trips enjoyable.

One of the standout features of the PLVW1342 is its brilliant display. The 13.3-inch screen boasts a resolution that delivers clear and vibrant visuals, allowing passengers to enjoy movies, shows, and games with stunning detail. The flip-down capability makes it convenient for users, as it can easily be stored away when not in use. This space-saving design is ideal for various vehicle types, including SUVs, vans, and larger cars.

Additionally, the PLVW1342 is equipped with multiple input options, including HDMI, USB, and AV ports, enabling users to connect a variety of devices such as DVD players, gaming consoles, or even smartphones. This versatility allows for a comprehensive entertainment setup, giving users the freedom to access their favorite content seamlessly.

Another impressive feature of the PLVW1342 is its built-in theme. Users can choose from a selection of colorful LED lights that can be adjusted to suit their mood or preference. This aesthetic appeal enhances the overall experience, particularly during nighttime travel, creating an engaging and immersive environment for viewers.

The monitor also incorporates advanced audio capabilities, ensuring that sound quality matches the stunning visuals. Integrated speakers provide clear and balanced audio, while the monitor's compatibility with external speakers or wireless headphones offers various listening options to accommodate user preference.

In terms of installation, the PYLE Audio PLVW1342 is designed to be user-friendly, allowing for straightforward mounting in almost any vehicle. This ease of installation combined with its functionality makes it a favorite among car audio and video enthusiasts.

Overall, the PYLE Audio PLVW1342 stands as a prime example of innovative technology in mobile entertainment systems. Its combination of large display, versatile connectivity options, aesthetic appeal, and high-quality audio performance makes it a compelling choice for anyone looking to enhance their travel experience with immersive entertainment. Whether for a family road trip or daily commuting, the PLVW1342 ensures that passengers are entertained and engaged throughout their journey.
Top Page Image Contents