PYLE Audio PLVWAN1 installation manual Parts Supplied, Proper Location, P Lv Wa N

Powered Diversity TV Antenna

P LV WA N 1

Installation Manual

Parts Supplied

1.TV Antenna(2)

2.Power Cord Holder(6)

3.Antenna Cable Holder(4)

4.Cigarette Light Plug(1)

5.Seal(2)

Antenna

Loading coil

Antenna cable

Antenna plug

Booster amp section

Power cord

(Fig 1)

Note:

1.Use only on vehicles with 12-14.4 Volt battery

2.Avoid short circuits by disconnecting the negative(-)battery cable before beginning installation.

3.Protect the wiring by wrapping adhesive tape around exposed areas.

4.Antenna wires should not get in contact with moving parts, areas of hot or sharp surfaces.

5.Avoid installing in areas that may get wet with rain. Failure to do so may result in fire or electrical shock.

Proper Location

Mount the antenna on the inside rear window of the car.

For optimum reception, mount the antenna pointing down.(See Fig 2)

Leave a minimum of 1 inch space between the antenna wires and the edge of the window.

Location should not impair driver s view.

Do not mount near or next to an existing antenna.

Be certain that there is enough cable to reach the unit.

Trial fit the antenna-do not remove protective paper from booster or antenna sections.

(Fig 2)