PYLE Audio PSWLE08 manual

Thisproduct contains small items that could be a choking hazard if swallowed. Keep

theseitems away from young children

1.Makesure these instructions are read and completely understood before attempting

installation.If you are unsure of any part of this installation, contact a professional

installerfor assistance.

2.Thewall or mounting surface must be capable of supporting the combined weight of

themount and the display; otherwise the structure must be reinforced

3.Safetygear and proper tools must be used. A minimum of two people are required

forthis installation. Failure to use safety gear can result in property damage, serious

injuryor death.

Thisproduct was designed to be installed on wood stud walls and solid concrete walls.

Beforeinstalling make sure the supporting surface will support the combined load of the

equipmentand hardware. Never exceed the Maximum Load Capacity. This product is

intendedfor indoor use only.Use of this product outdoors could lead to product failure or

personalinjury.

Part 3-

NOTE:

Hangthe screen

Hookthe screen onto the wall plate. Then swing the screen down. Once the screen is

settled,pull down the Supportable lever, so that you can insert the cable.

Alwaysuse an assistant or mechanical lifting equipment to safely lift and

positionheavy equipment.

Part 3-

NOTE:

Hangthe screen

Supportableblock

TVconnection block

Wallplate

TVconnection block

Wallplate

INSTALLATIONGUIDE

www pyleaudio com..

PyleAudio160063rd st , Brooklyn, NY,11204(718)236-8000