PYLE Audio PSWLE08 manual Hardware Kit, 812mm32, Part 1a-Wood Stud Mounting

Hardware Kit:

Wall plate TV connection block

Bubble level

Supportable block Supportable lever

1 2 3 4 A,C,E,G B,D,F,H I J

Part 1a-Wood Stud Mounting

ID	Qty	Description
1	3	Long bolt
2	3	Long bolt washer
3	3	Wall anchor
4	1	Box wrench
A	2	M4×15mm bolt
B	2	M4×16mm bolt
C	2	M5×15mm bolt
D	2	M5×16mm bolt
E	2	M6×15mm bolt
F	2	M6×16mm bolt

G2 M8×20mm bolt

H2 M8×16mm bolt

I2 M5 taper washer

J2 M5 washer

Part 1b-Concrete wall mounting
Level wall plate and use wall as a template to mark three holes. Drill three 3/10”(8mm)
dia. holes 2”(50mm) deep. Insert three anchors(3) into holes and secure wall plate
with three long bolts(1) and three washers(2) by box wrench(4).Tighten screws
firmly. Do not overtighten.	")
	812mm(32

	3
2”(50mm)
	2	1
Φ3/8”(10mm)		4

Part 2-Attaching Supportable block and TV connection block To Screen

Use wall plate as a template, make sure it is level, and mark three mounting holes along the center lines of the wood studs. Drill three 3/16”(5mm)dia.holes 2”(50mm) deep. Level wall plate and attach to wall with three long bolts(1) and three washers (2) by box wrench(4). Tighten screws firmly. Do not overtighten.

Wood stud	2”(50mm)	")
		812mm(32
	Φ3/16”(5mm)

2

1

4

First, select the small(A,B), medium(C,D,E,F) or large(G,H) screws. To attach supportable block by using selected screws(A,C,E,G) and washers(I), and then attach TV connection block to screen by using selected screws(B,D,F,H) and washers

(J). Tighten screws firmly but do not overtighten. WARING screws(A,B,C,D)need washer, screws(E,F,G,H) don’t need washer.

			I
E,G		A,C	J
		I
F,H	J	B,D

	-3-
-2-