PANEL INFORMATION
1 | 2 | 4 | 9 | 11 |
POWER |
| MEMORY | MEM | CLEAR | |
|
|
|
|
|
|
|
|
|
|
REPEAT 
INTRO
OPEN/CLOSE |
6 | 3 | 5 | 8 | 7 | 10 | 12 |
1. ON/STANDBY BUTTON
Depress button to turn on the unit. Press it again to turn off unit and into “STANDBY MODE”.
2.CD SLIDE DOOR
When open, the CD tray will slide out to accommodate the disc.
3.OPEN/CLOSE
Press the OPEN/CLOSE button. The disc tray will slide out. When it has opened fully, place a compact disc carefully in the tray, and press it once to close.
4.MUSICAL CALENDER
Display the function that is processing.
5.PLAY/PAUSE
Press this button to play and press it once again if you wish to pause. The relative sign will be shown on display. If in pause mode, press this button once again to resume the operation.
6.STOP 
Press this button to stop the playing/ fastFWD/ fastBWD or any kinds of such operations.
7.FastFWD 
The player will skip ahead to the next track each time the FastFWD 
button is pressed. Continuously pressing this button makes the player scan through the tracks forward fast.
8.FastBWD 
The player will skip backward each time the FastFWD 
button is pressed. Continuously pressing this button makes the player scan through the tracks backward fast.
9.MEMORY
Press this button at first, the MEMORY and the corresponding track will be flashed. Then press the FastFWD 
or FastBWD 
to reach your desired track, and press MEMORY button once more to store the first track. If
wishing to store the second track, press the FastFWD 
or FastBWD 
to the second desired track and press MEMORY button to store the second track.
Repeat the same procedure to similar settings. Continue to enter track numbers until all the
for playback. Press the STOP 
upon finishing programming. Press PLAY 
button once, the different tracks that have been stored will be played accordingly to the memories stored.
All the memory registered tracks will be cleaned if you press STOP and MEMORY simultaneously.
10.REPEAT
Press REPEAT button once, the display will shown out
, then the track which is in play mode or ready mode will
repeat until you switch off the CD player or press STOP 
. Press REPEAT button once more, 
will shown on the display, all tracks will be repeated until you switch off the CD player or press STOP 
button.
11.MEM CLEAR
Press this key to clear all memories.
12.INTRO
If you desire the Introduction Scanning, you can press INTRO button. Then each track will be scanned 10 seconds. An “INTRO” will be shown on the display. Press it once again can resume the operation, the relative light will gone off
