OPERATING PROCEDURES
VOLTAGE SELECTOR
Use this switch to select the proper Voltage for your region
REMOTE SYSTEM
TO AMP
OUTPUT 
CD
110~120V 220~230V
60Hz 50Hz
INTEGRATED CIRCUIT
AC 220V - 230V ~50Hz
| REMOTE SYSTEM |
|
|
|
|
| ||
EQ |
| TA PE | TUNER | CD |
|
|
|
|
|
|
|
|
| TA PE |
|
| EQ |
TUNER | CD | AV1 | AV2 | AUX | PLAY | REC | PLAY | REC |
L |
R
L
_
PA |
| VO LTAG E S E LE CTO R | |||
| 1 10 | ~1 20 V 2 20 | ~2 30 V | ||
|
| 6 | 0Hz | 5 | 0Hz |
|
|
|
|
|
|
RIGHT LEFT
INTEGRATED CIRCUIT
AC 220V - 230V ~50Hz
_
A U DIO
Operating procedure
*Switch on the Amplifier.
*Select “CD” from function selection column at the Amplifier, relative light will be seen when selected.
*Turn on the CD player by pressing POWER switch (1).
*Press the OPEN/CLOSE button. The disc tray will slide out. When it has opened fully, place a compact disc carefully in the tray.
**Note** (a) Always place the compact disc in the disc tray with the label facing upward.
(b)The CD tray accepts two different sizes of disc: 120 mm & 80 mm.
(c)This CD player can also playback CDR/CDRW disc.
*To close the disc tray, press the OPEN/CLOSE button again. When the tray is securely closed the disc will start turning automatically and the total number of selections and the disc time will be counted. A few seconds later the PLAY indicator will light, and the TRACK NO. and TIME counters will show “10:00”.
Press the PLAY/PAUSE button. Playback will start, the PLAY indicator “►” will go on.
SPECIFICATIONS
Output voltage…………………….2 Vrms (0 dB)
Freq. Response……………………20 to 20 KHz
Sin ratio (FLAT)…………………..75 dB (1 KHz)
Channel separation………………..58 dB (1 KHz)
Channel balance…………………..0.5 dB (1 KHz)
Power consumption………………10W
Dimensions ………………………..420 x 90 x 250mm (W x H x D)
Weight……………………………..3.5 Kg
