Step 4
Carefully position monitor so that Wall and Monitor Plates are vertically aligned, with the bottom of Monitor plate overlapping the top of the Wall Plate by approximately 1”.
Gently lower monitor into position, sliding the two plates together until the Monitor Plate bottoms out. (Fig. 3)
Caution: Make sure that the plates are engaged on both sides of the mount before releasing grip on monitor.
| 1 |
| 2 |
| 3 |
Fig | 3 |
Flat Panel Fixed Mount
INSTALLATION GUIDE
Item No.:PWLB006
Step 5
Install two Safety Bolts (3) through bottom of Wall Plate. (Fig. 3)
Caution : This Product LCD /Plasma Wall Mount Bracket is
intended for use only with the maximum weights indicated .See apparatus instructions .Use with products heavier than the maximum weights indicated may result in instability causing possible injury .
TV Size Rang: 10" - 24"
Universal VESA mount
Low profile: only 17mm from wall
Easy to install: sliding plate operation
Max load capacity:15Kg/33lbs
IMPORTANT: If don’t understand about right install ways, please consult to normal installing specialist.
