OPERATION
1.POWER SUPPLY
a. AC power: Please confirm your current AC power is same as the voltage marked on the device.
b.DC power: DC power can be input from DC IN jack. If you use car battery, the power should be
C.
2.Turn on power switch of amplifier, power indicator will light.
3.Open the battery cover of the transmitter. Put a 9V battery into battery compartment and then close the battery cover. Keep transmitter at least 1M from the receiver to prevent feedback. Turn on transmitter, RF indicator on receiver will light. Adjust wireless microphone volume to suitable level. The wireless system is now ready to use.
4.Wired MIC can connect to MIC in jack and its volume can be adjusted separately. Wire microphone and wireless microphone can be used at the same time.
5.Adjust TREBLE/BASS to suitable level. When
6.REC OUT can connect to recorder player or external amplifier.
OPERATION
Recharging:
1.Connect amplifier to AC power, charge indicator will light. The unit starts to charge rechargeable battery. DC power can not charge the battery.
2.During charging you can use the unit at the same time.
3.When using rechargeable battery, if the unit stops producing sound, this means the rechargeable battery power is low. Connect AC power to charge the battery. Charging time is about 8~10 hours.
4.Please charge this device every 2 months if you don't use the device for a long period of time.
5.Unplug th unit from mains power supply if you are not going to use this device for a long time or after charging.
