![](/images/new-backgrounds/1199199/19919915x1.webp)
Mono Input Channel Controls
CH1/CH2 For PYD6070 | CH1/CH2/CH3/CH4 For PYD1270 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MIC
Each mono input channel comes with an XLR balanced microphone input connector and also offers a +48V PHANTOM switch to supply power for condenser microphones. Please mute the playback/PA loudspeakers system before switching on +48V PHANTOM power to prevent the switch- on thumps being directed to the loudspeakers. Please connect the microphones before switching on the +48V PHANTOM power supply, do not connect microphones to the mixer as long as the phantom power supply is switched on. Wait for approximately one minute to get the system stabilized.
LINE
Each mono input channel comes with a balanced 1/4" (TRS) line level input jack. The unbalanced devices can also be connected to this input.
NOTE
Please use only either the MIC or LINE input of a channel at any one time, do not use both simultaneously.
EQ (HI/MID/LO)
ALL the mono input channels has a
EFX
It enable you to feed channel signal to the external effect.
PAN
It determines the amount of the channel signal feeding the left and right mix bus, to locate the source smoothly across the stereo image. Its
PEAK
It illuminates to warm you the input channel signal is driven too high, which could cause distortion. Use the GAIN control to adjust until the LED does not light.
GAIN
This rotary GAIN control adjusts the channel input gain level. Proper gain setting gives the mixer to work in the best operating level. Please turn it to 0 completely whenever you connect or disconnect a signal source to one of the inputs.
LEVEL
It determines the level of channel signal in the MAIN mix bus and provides a clear visual indication of channel level.
LO CUT (PYD1270)
It is a steep LO CUT filter designed to eliminate unwanted low frequency hum. It is useful on live vocals to reduce stage rumble or "popping" noise from microphone.
6 – Pyle Pro Mixer PYD6070/1270 Owner’s Manual