Q-Logic ISR6140 quick start Present LUNs to iSCSI Initiator

4.Present LUNs to iSCSI Initiator:

a.Click the Refresh button to refresh the SANsurfer display. The iSCSI initiator names should appear on the Discovered Initiators tab.

b.Run the LUN presentation Wizard to assign a LUN(s) to a server(s).

c.Launch the Presentation Wizard from the Wizards drop-down menu. This wizard allows you to map a LUN to the iSCSI initiator on your server. The screen that allows this mapping looks as follows:

d.Save the mappings using your management password.

e.Refresh the SANsurfer Router Manager display. Now, when you select your iSCSI initiator on the LHS of the display, you should be able to see the LUNs mapped to that initiator as follows:

f.Return to the Windows Server screen and select LogOn to log on to this target. The status should change from Inactive to Connected.

Congratulations! You have now successfully installed your QLogic iSR6140 and mapped target LUNs to iSCSI initiator on your server. Your server should see the Fibre Channel LUNs through the server’s volume manager.

7