Q-See QS206 manual Part 1 Package Contents, Part 2 DVR Camera and Power Connections

PART 1 - PACKAGE CONTENTS

	Color Cameras with Stands	Manual and
QS206 DVR		Software CD

PART 2 - DVR CAMERA AND POWER CONNECTIONS

STEP 1: Connect the Cameras to the Cables

Pre-Installed

Hard Drive

1 BNC(M) to RCA(M)

Adapter Cable

manuals and softwa re

QS Serie s

QS408 • QS20 6

Ethernet

Cable

1C

Connect the remaining connector to one of the ends on the power splitter. Repeat for all cameras.

												1A	Connect both camera leads to the matching
													ends on the power/video cable.
													Repeat for all cameras.
					1B				Attach the BNC connector on the power/video cable to a
									Video In port on the DVR. Repeat for all cameras.
										VIDEO IN
1		2	3	4	5			6		7	8		9	10	11	12	13	14
													AUDIO IN		AUDIO CVBS OUT		16	15
DC +12V		VGA	RJ45	USB		1 2 3 4	GND5 COM1 NO1 COM2 NO2 GND 485A-2			485B-2 GND 485A-1 485B-1	GND +12V GND
	IN					ALM IN									OUT

Power Supply

for DVR

Power Supply and

4- or 8-Way Splitter

60-Foot

Power and Video Cable

(One per camera)

STEP 3:

Connect the other power supply to the DVR .

STEP 2:

Connect the single end of the power splitter to the included power supply.

STEP 4:

Connect both power supplies to a surge protector.

STEP 5:

Connect thesurge protector to an outlet.

Remote Control

USB 2.0

Mouse

Grounding Cable

Not used in North America

IMPORTANT! It is STRONGLY recommended to use a surge protector that is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating of at least 400 and a response time of 10 nanoseconds or less.

The appearance of contents may differ from images shown. Revised 6/29/11