PART 3 - CONNECTING THE DVR TO YOUR DISPLAY
To Connect to a Computer Monitor:
1.Plug the VGA cable (not included) to the VGA port on the DVR.
2.Connect the other end of the VGA cable to the monitor.
To Connect to a TV:
3.Plug the BNC to RCA adapter cable into the Video Out port on the DVR.
4.Connect the other end of the RCA cable to the Video Input on the TV.
NOTE! To switch back and forth between VGA and TV, use the
Mouse
|
|
|
|
|
| VIDEO IN |
|
|
|
|
|
| |
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 |
|
|
|
|
|
|
|
| AUDIO IN | AUDIO | CVBS OUT | 16 | 15 | |
IN | VGA | RJ45 | USB | 1 2 3 4 | GND5 COM1 NO1 COM2 NO2 GND | GND +12V GND |
|
| |||||
ALM IN |
| OUT |
|
|
|
| |||||||
DC +12V |
|
|
|
|
|
|
|
|
|
| |||
1 | 3 |
2 | 4 |
IMPORTANT! The default resolution of this DVR is 1024x768 pixels. Some monitors smaller than 19” may have problems displaying this resolution.
PART 4 - DVR CONTROLS: FRONT PANEL
Item # | Name/ Symbol | Description |
|
|
|
|
|
1 | STANDBY | Press to set the system in standby mode. | |
|
|
|
|
2 | MENU/EXIT | Press to open/close the main menu. | |
|
|
|
|
3 | CHANNEL/ | Press the number buttons to select a channel and view it full- | |
| NUMBERS/ | screen; press buttons | |
| PLAYBACK |
|
|
|
|
|
|
4 | NAVIGATION/ | OK | In menus, press to confirm selections; in PTZ mode, |
| OK |
| press to change the navigation buttons to control a |
|
|
| connected PTZ camera (not included) |
|
|
|
|
|
| ▲ | Press to move cursor up; in PTZ mode, press to pan |
|
| camera up. | |
|
| ▼ | Press to move cursor down; in PTZ mode, press to |
|
| pan camera down. | |
|
| ◄ | Press to move cursor left; in PTZ mode, press to pan |
|
| camera left. | |
|
| ► | Press to move cursor right; in PTZ mode, press to |
|
| pan camera right. | |
5 | LED | Shows status of hard drive, recording, alarm, HDD full and | |
| INDICATORS | network. |
|
|
|
|
|
6 | DURING | ◄◄ | Increase reverse playback speed 1X, 2X, 4X. |
| PLAYBACK |
| |
| PRESS: | n/► | Press to freeze playback to one frame, then press |
|
| again to advance | |
|
|
|
|
|
| ► | Press to start playback |
|
| ►► | Press to slow playback speed by 1/2, 1/4, 1/8. |
|
| ►► | Press to increase forward playback speed 1X, 2X, |
|
| 4X. | |
7 | IR SENSOR | IR Receiver for remote control. | |
|
|
|
|
8 |
| USB | Connect a USB flash drive for data backup and |
|
|
| firmware upgrades |
|
|
|
|
