Q-SEE QUICK INSTALLATION GUIDE
MODEL NUMBER QS218-411
The Motion Detection Menu has 3 sections, including Channel Status, Sensitivity and Motion Area.
Status: This option allows you to enable motion detection on any channel.
Sensitivity: This option allows you to set sensitivity level of motion detection from 1 to 4, with 4 being the highest.
MD Area: Allows you to set the area of the camera view that you want to be sensitive to motion.
Next, click on the MD AREA SETUP button, which will display the picture on the left. This option allows you to select the area you want to be sensitive to motion. You can set this area by using the mouse or REV, FWD, and SEL keys on the front panel. Once you have set the area, right click with the mouse or push the ESC key key to save the setting. After you have set all of the cameras, click on the Apply button to save the settings.
PART 9 - SETTING UP THE DVR TO PLAYBACK
Searched Playback:
From the Main Menu select SEARCH to display the Video Search Menu shown to the right. If you input a specific date and click Search, you will find all the recordings for that day. When you select an item, you will playback the recordings in 4 channel mode; or, click [File list] button to display File list interface, where you can playback or backup the file you selected. See File List heading below.
In the playback window you can play video Forward at 2x, 4x, and 8x speeds, Slow play at 1/2x, 1/4x, and 1/8x, or normal play, pause and play frame by frame using the playback control bar, and adjust volume by clicking or sliding tune control bar. When playback has finished, system will return to previous menu.
7 P a g e
