QSTD Series
Port Forwarding Instructions
NOTE! The DVR and PC must be connected to the same router.
Port Forwarding allows computers and devices outside of your network to communicate with the DVR. You will need to forward ports 80 and 6036 from the attached router to the IP address of the DVR. Your router must be powered up and attached to the DVR before proceeding.
Things you will need to know :
1.The make and model of the router.
2.If you changed the default router login, then you will need to know the user name and password for that router.
3.The IP address for the router.
4.You will be forwarding ports 80 and 2000.
SECTION 1: DETERMINING THE IP ADDRESS OF DVR
To find out the IP of DVR for QSTD series DVRs do the following:
STEP 1.
Click on the Menu icon.
PICTURE 1
STEP 2. This will bring up the Main
Menu where you click on System.
STEP 3. Select Network (Red box in Picture 3) in the System Menu window.
PICTURE 3
STEP 4. This is the Network Setup window. Put a checkmark in the DHCP option box (Red box in Picture 4)
Click OK button for the router to assign the DVR an IP address
PICTURE 4
STEP 5. After the router has assigned the DVR an IP address, go back to the Main Menu and click on the Information icon
PICTURE 5
STEP 6. Click on the Network Icon
PICTURE 2 | PICTURE 6 |
|
