Installation Options
The yoke bracket can be used to support the HPR 122i in several ways.
Yoke above loudspeaker enclosure (Figure 3) - If using the yoke
bracket positioned above the enclosure, attach to the enclosure using the outer- most set of mounting holes in the bracket’s arms.
If single point bracket attachment to the support structure is used, ensure the support hole just right of the loudspeaker‘s centerline is used in order to keep the enclosure’s weight bal- anced.
Yoke below loudspeaker enclosure (Figure 4) - If using the yoke
bracket positioned below the enclosure, attach the yoke to the enclosure using either set of mounting holes in the bracket’s arms.
Yoke behind loudspeaker enclosure (Figure 5) - If using the
yoke bracket positioned behind the enclosure, use the innermost set of mount- ing holes in the bracket’s arms. Do not use the outermost set of holes!
If the yoke bracket is behind the loudspeaker, the inner set of mounting holes (on the brackets arms) must be used.
Third party loudspeaker pole stand mount (Figure 6) - The
yoke bracket may be attached to a third party loudspeaker pole stand mount. This allows the user to mount the HPR 122i on a 35mm loudspeaker pole and be adjusted for up- or
When attaching the pole mount, use the pole mount holes that result in the center of the pole being offset to the right of the loudspeaker’s centerline (as viewed from the front of the enclosure).
Do nothing- Keep in mind, if you do not know what you are doing, don’t mount this loudspeaker to anything, including the yoke bracket. Consult profes- sional assistance if unsure about any loudspeaker mounting or suspension topic or procedure.
Warranty
(USA only; other countries, see your dealer or distributor)
Disclaimer
QSC Audio Products, Inc. is not liable for any damage to amplifiers, or any other equip- ment that is caused by negligence or improper installation and/or use of this loud- speaker product.
QSC Audio Products 3 Year Limited Warranty
QSC Audio Products, Inc. (“QSC”) guarantees its products to be free from defective material and / or workmanship for a period of three (3) years from date of sale, and will replace defective parts and repair malfunctioning products under this warranty when the defect occurs under normal installation and use - provided the unit is returned to our factory or one of our authorized service stations via
Customer may have additional rights, which vary from state to state.
In the event that this product was manufactured for export and sale outside of the United States or its territories, then this limited warranty shall not apply. Removal of the serial number on this product, or purchase of this product from an unauthorized dealer, will void this limited warranty. Periodically, this warranty is updated. To obtain the most recent version of QSC’s warranty statement, please visit www.qscaudio.com. Contact us at
Figure 3- Yoke above enclosure.
Single point attachment hole.
Figure 5- Yoke behind enclosure.
Note! Use inner set of mounting holes for attaching enclosure to bracket arms.
Figure 6- Yoke mounted on third-party loud- speaker pole mount.
Note! Use the pole mount holes (shown) to the right of the loud- speaker’s centerline as viewed from the front of the enclosure. This will better balance the loud- speaker over the pole.
