Specifications
Frequency Response1: | 80- 20k Hz |
|
| 75hz | |
Drivers: | low frequency- 3” (762 mm) magnetically shielded | |
| high frequency- 3/4” titanium dome, neodymium magnet structure | |
Maximum Output2: | 99 dB SPL continuous rms output | |
(calculated) | 106 dB SPL peak output | |
Impedance: | 8 ohms nominal |
|
| 6.7 ohms minimum, 300 Hz | |
| 31 ohms maximum, 150 Hz | |
Power Rating3: |
|
|
rms (IEC 100 hrs): | 30 watts rms |
|
recommended amp power: | 60 watts rms |
|
Sensitivity: | 85 dB, 1 watt, 1 meter, free field (4 pi) | |
Directivity Index: | 500 Hz | 2.5 |
| 1000 Hz | 4.5 |
| 2000 Hz | 7.0 |
| 4000 Hz | 7.0 |
| 8000 Hz | 2.3 |
| 10000 Hz | 11.4 |
Q: | 500 Hz | 1.77 |
| 1000 Hz | 2.8 |
| 2000 Hz | 5.0 |
| 4000 Hz | 5.0 |
| 8000 Hz | 5.35 |
| 10000 Hz | 13.8 |
Weight per pair: | ||
Nominal Coverage: | 100° horizontal. x 60° vertical | |
Enclosure and Grill: | high impact polystyrene, removable aluminum grill | |
Connectors: | Screw terminal connector for wire, bare wire or spade lugs. | |
Mounting Hardware: | Included: Ball mount adapter with wall plate and yoke mount with retaining knobs. | |
NOTES: |
|
|
1- All frequency ranges specified refer to measured
2- Calculated maximum peak SPL at 1 m,
3- Maximum input power tested in accordance with IEC recommendations; 50 Hz to 20 kHz band limiting, 6 dB signal crest factor.
Specifications are subject to change without notice.
6
