Preliminary Specification
Control Room Foldback Monitoring
Connector Type
Pinout
Tap points
Monitor Input
Monitor Signal (unit off)
Maximum level
Impedance (nominal)
CMRR,
Monitor Output
Monitor
Freq. Resp.
Distortion
Noise Floor
Output Impedance (nom)
Output Load (min)
Monitor Level
Control Range (nom)
Relay Outputs
Connector Type
Configuration
Pinout
Switching Capacity (nom)
Logic Outputs
Connector Type
Configuration
Pinout
Omni Inputs
Connector Type
Configuration
Pinout
Normal Operating Range
Potentiometer Operation
Voltage Tolerance
Current Output
RS-232 Port
QSControl.net
CobraNet
Indicators
QSControl Status
CobraNet Status
Power
Diagnostic
DataPort Status (Port)
LCD Data Display
Dimensions
Weight
8 internal input, 8 internal output, 8 amplifier
Unity gain connection, relay bypass +21 dBu
10K ohms >54 dB
Sum of Monitor Input and signal from internal monitor tap point(s) +/- 0.5dB
<0.05% @ +4dBu >90dB
100 Ohms
600 Ohms
0dB to
2 discrete floating relay switch outputs
1:NC 2:NO 3: COM 1A 30VDC
4 discrete outputs
1:+(Signal)
6 discrete inputs for TTL logic, voltage control or passive resistive
1:+(Signal)
Reads signals between
+/- 48V
0.5mA with 10K pot (for passive resistive controls) Female DB9 Connector
Neutrik Ethercon RJ45 Ruggedized Data Connector
Neutrik Ethercon RJ45 Ruggedized Data Connector
Yellow Link, Tx, Rx, front panel / Green Link, Tx, Rx, rear panel Yellow Link, TX, RX, front and rear panel
Blue, front panel Red, front panel
18.89” (479.8mm) W x 1.73” (43.9mm) H x 15.00” (381.1mm) D
10.10 lb. (4.58 kg) | 25 |
Specifications are subject to change without notice. |