Channel 1 input 
Channel 2 input 
not used 
Channel 1
signal input 
Channel 2
No input! 
Can be used to
additional amplifiers
Amplifier #2 input
– Figure 19 –
Distributed Constant Voltage Outputs
70 Volt Operation:
The CMX 300V and 500V must be configured for Bridge Mono mode for 70 Volt operation. Please refer to the above section on Bridge Mono mode for proper setup configuration.
The CMX 800V can operate in 70 Volt operation in Stereo mode or Bridge Mono mode.
100 Volt Operation:
The CMX 500V and CMX 800V must be configured for Bridge Mono mode for 100 Volt operation. Please refer to the Bridge Mono mode section for proper setup configuration.
Specifications |
| CMX | CMX | CMX |
| 300V | 500V | 800V | |
|
| |||
Stereo Mode (Both Channels Driven) |
| |||
|
|
|
|
|
70 Volt |
| - | - | 400 W |
|
|
|
|
|
100 Volt |
| - | - | - |
|
|
|
|
|
Bridge Mono Mode |
|
|
| |
|
|
|
| |
70 Volt |
| 600 W | 1200 W | 2000 W |
|
|
|
|
|
100 Volt |
| - | 600 W | 2300 W |
|
|
|
|
|
– Table 2 –
10
