This compact module offers two channels of independent DSP and attaches to the back of most 2-channel DataPort equipped QSC amplifiers—without occupying any additional rack space.
Capitalizing on the success of our DSP-3, the second-generation DSP-4 provides several enhancements in functionality and performance while also incorporating the universally popular XLR balanced connectors. These enhancements include new A/D and D/A converters for improved signal-to-noise performance and upgraded software that significantly increases the unit’s operational characteristics.
Powerful
Simple to install, compact, and featuring “set-and-forget” convenience, the DSP-4’s powerful processor enables you to perform a wide range of signal processing functions; and with its new A/D and D/A converters, its noise floor improves. Whether you need speaker crossovers, EQ, signal delay, or infrasonic filters, the DSP-4 is as flexible as your system’s needs.
Each channel includes: | |
• Crossover filtering | • Shelf filtering |
• Compression and limiting | • Mixing |
• Multiple Parametric EQs | • Multiple Delays (up to 910 ms) |
• Precision attenuation | • Tone and noise generation |
Configurable
The DSP-4’s processing horsepower is dynamically assignable so you are not limited by a fixed signal chain. Simply use QSC’s powerful PC- based Signal Manager software to easily configure multiple processing functions and signal flow with “drag-and-drop” tools.
Cost-effective
The power and flexibility of the DSP-4 eliminates the need for expensive outboard processing gear, reducing cost and installation time for almost any application. The compact DSP-4 also plugs directly into the back of most QSC DataPort-equipped amplifiers for use in systems where rack space is a premium.
Save space and weight by mounting the DSP-4 onto the back of most 2-channel DataPort equipped QSC amplifiers. Or use multiple DSP-4s as a stand- alone,rack-mounted DSP solution.