OPERATING YOUR BREVILLE Smart Scoop ™ Ice Cream Machine
Manual mode
Start up
Unwind the power cord completely and insert the power plug into a 110/120V outlet.
Press the POWER button to turn the machine on. An alert will sound and the POWER button will illuminate white. The LCD screen will display the AUTO mode and selection bar. The ice cream machine and LCD screen will always revert to the last program or setting that was used.
Ensure the machine is in MANUAL mode by pressing the MANUAL timer arrow 
buttons. The time will be displayed and the arrow should point to the MANUAL on the left hand side of the screen.
To change the time that you wish to churn and chill, press either one of the MANUAL timer arrow keys. On average, ice cream will need about 50 minutes to churn and chill.
This is just an estimate please refer to your recipes for churning times.
Hardness selection
This is not available in the manual mode.
Adding the ingredients and starting operations
Once the previous functions have been selected the ingredients can now be added.
a)Ensure that the paddle and bowl, and bowl chamber are clean.
b)Insert the bowl into the dry, clean bowl chamber by pressing down firmly on the rim of the bowl until it is securely in position. Ensure bowl handle hinges sit inside grooves on the chamber. It is important that the ice cream bowl is properly assembled onto the drive shaft to ensure that the paddle operates correctly.
c)Align the hole in the bottom of the paddle with the drive shaft in the bowl. Push down firmly and secure into place.
d)It is important that the paddle is properly assembled onto the drive shaft to ensure that ingredients are churned properly.
Adding the ingredients
a)Add ingredients to the ice cream bowl as specified in the recipes before inserting bowl into the ice cream chamber. Wipe any spilled ingredients from the rim of the bowl.
b)Place the lid onto the ice cream bowl. It is not recommended to open the lid during operation unless stated in the recipe of if
c)Ensure that the machine is in MANUAL mode.
d)Set the time that you desire by pressing
the MANUAL buttons up or down 
.
e)Press START PAUSE button for the ice cream making process to start. The light around this button will illuminate red to indicate that the button has been selected and the machine has now started the churning process.
f)When the desired time has been reached the compressor and motor will stop. READY will illuminate and REMOVE BLADE will flash on the LCD display. The selected tone will sound to alert the user that the dessert is ready.
NOTE
The READY will illuminate and REMOVE BLADE will flash for 10 minutes only, and then turn off. It can also be turned off ahead off this time by pressing any button or dial. 10 minutes after the timer has elapsed, the screen will revert back to original screen before ‘START PAUSE’ was pressed.
MANUAL MODE
15
BCI600XL_IB_E12_FA.indd 15 | 7/02/12 2:58 PM |
