OPERATING YOUR BREVILLE Smart Scoop ™ Ice Cream Machine
AUTOMATIC MO
a)Ensure that the paddle and bowl, and bowl chamber are clean.
b)Add ingredients to the ice cream bowl as specified in the recipes. Wipe any spilled ingredients from the rim of the bowl.
c)Insert the bowl into the bowl chamber by pressing down firmly on the rim of the bowl until it is securely in position., ensuring bowl handle hinges sit inside grooves on the chamber. It is important that the ice cream bowl is properly assembled onto the drive shaft to ensure that the paddle operates correctly.
d)Align the hole in the bottom of the paddle with the drive shaft in the bowl. Push down firmly and secure into place.
e)It is important that the paddle is properly assembled onto the drive shaft to ensure that ingredients are churned properly.
f)Place the lid onto the ice cream bowl. It is not recommended to open the lid during operation unless stated in the recipe or if mix ins are required.
g)To change the temperature reading from C to F press the 
button.
h)Press volume button to select from high, low, music or mute.
i)To start making the dessert press START PAUSE. Once you press START PAUSE all of the indicators on the selection bar will disappear and ONLY the selected dessert/consistency indicator will remain. As the dessert starts to freeze the indicators on the selection bar will display and scroll up the selection bar to the chosen dessert. This may take up to 60 minutes before indicators illuminate. The ice cream machine should now start cooling and churning to the desired setting. The LCD screen will toggle between the elapsed churning time and the current temperature that the machine is chilling, 'KEEP COOL' and 'COOLING' will illuminate. An indicator will sit above the selected hardness setting.
NOTE
If the START PAUSE button is pressed during the cycle this will pause the time. To resume the process press the button again. If you need to reset the timer press and hold the START PAUSE button for 2 seconds and this will reset the selection.
j)When the desired setting has been reached the compressor and motor will stop. READY will illuminate and REMOVE BLADE will flash on the LCD display. The chosen indicator will sound to alert the user that the dessert is ready.
NOTE
The READY will illuminate and REMOVE BLADE will flash for 10 minutes only, and then turn off. It can also be turned off ahead off this time by pressing any button or dial.
NOTE
It could take up to 60 minutes for the indicators on the selection bar to start moving up on the LCD display.
14
BCI600XL_IB_E12_FA.indd 14 | 7/02/12 2:58 PM |
