Breville BCI600XL manual PAC geRE header&CLEANING, Cleaning the Stainless steel housing

PAC geRE header&CLEANING.....

Ensure that the ice cream machine is turned off by pressing the POWER button. The ice cream machine is off when the ‘START PAUSE’ button ’s LCD light is no longer illuminating red. Remove the power plug from the power outlet. Allow the ice cream machine compressor to cool completely before disassembling and cleaning.

Cleaning the Stainless steel housing

1.Wipe the exterior of the stainless steel housing and the LCD screen with a soft damp cloth. A non-abrasive liquid cleanser or mild spray solution may be used to avoid build up of stains. Apply the cleanser to the sponge, not the outer surface or LCD screen, before cleaning. Do not use a dry paper towel or cloth to clean the LCD screen, or use an abrasive cleanser or metal scouring pad to clean any part of the ice cream machine as these will scratch the surface.

NOTE

Never immerse the stainless steel housing in water or place in the dishwasher. Take care not to allow water or cleaning fluids to seep under the buttons or LCD screen on the control panel.

2.If over-spill of cream, milk, chocolate etc. occurs in the interior chamber, carefully remove them using a soft, damp cloth.

3.Let all surfaces dry thoroughly prior to inserting the power plug into a power outlet.

24

Cleaning the lid

The lid can be cleaned in warm soapy water, using a soft sponge. Do not use an abrasive cleanser or metal scouring pad as these will scratch the surface. Let all surfaces dry thoroughly prior to placing into the ice cream machine.

Cleaning the Ice cream Bowl

1.Fill the ice cream bowl up half way with warm soapy water. A non-abrasive liquid cleanser or mild spray solution may be used. Allow to stand for 10-20 minutes.

NOTE

Ice Cream Bowl is NOT dishwasher safe.

NOTE

To clean the ice cream chamber ensure that the machine is at room temperature. Wipe inside chamber with a damp cloth and soapy water. Once clean, dry thoroughly.

BCI600XL_IB_E12_FA.indd 24 7/02/12 2:58 PM