LOREX Technology LW2301 instruction manual Quad Mode, Recording Tip

Quad Mode

Use Quad mode to view up to four cameras simultaneously.

To enable/disable Quad mode:

•Press the QUAD button on the wireless receiver or the remote control; The Schedule Recording warning appears briefly on-screen (see figure 5.2), then the Quad display mode begins.

NOTE: The signal indicator or SD card icon are not shown while the receiver is in Quad mode.

NOTE: You cannot access the Main Menu while the system is in Quad Mode.

Cam1Cam2

Cam3Cam4

Figure 5.1 Quad Mode

Quad mode is also available while in Zoom mode. For details on using Zoom, see “Zoom” on page 43.

ATTENTION: While in Quad Mode, you cannot turn on Schedule Recording.

Recording Tip!

Using Quad Mode with Motion Recording is a highly recommended recording solution. For more details, see “Motion Recording” on page 25.

Schedule

Recording Cannot begin because you are in Quad Mode

Figure 5.2 Quad Mode warning

19