LOREX Technology LW2301 Appendix C Adding Cameras, Press Pair on the back of the camera

Appendix C: Adding Cameras

Appendix C: Adding Cameras

The system comes with a camera that has already been paired to the wireless receiver. The Pairing Function assigns each camera to a different channel on the wireless receiver (up to four cameras), and is necessary for configuring additional cameras. By default, the camera included with the system appears on channels 1 on the wireless receiver.

NOTE: It is highly recommended to pair the cameras to the receiver before permanently mounting the cameras.

To pair an additional camera:

1.Connect the new camera to a power outlet. DO NOT permanently mount the camera.

2.Press MENU on the wireless receiver or remote control.

3.From the Main Menu, select Pairing and press the Enter/OK button.

4.Select Camera 2, Camera 3, or Camera 4 and press the Enter/OK button.

NOTE: By default, the camera included with your system is paired as Camera 1 (channel 1).

5.Following the on-screen prompt, press the Pair button on the rear panel of the camera. You have 30 seconds to press the PAIR button on the camera. Once paired, the camera will be immediately displayed on-screen.

NOTE: If you do press the Pair button on the camera during the 30 second pairing window, repeat steps 2~5 to try the pairing process again.

Once the camera is paired you can permanently mount the camera to a desired location.

Figure 13.0 Pairing menu

Cam2

Please Press

Pair Key on Camera side 30

Figure 13.1 Pairing screen

At the pairing screen, you have 30 seconds to press the PAIR button on the rear panel of the camera.

Figure 13.2 Press “Pair” on the back of the camera

49