LOREX Technology LW2301 instruction manual Appendix G Power Failure, Power Failure icon

Appendix G: Power Failure

Appendix G: Power Failure

A power failure may interrupt recording modes on the system. After power is restored, the following will occur:

ƒThe system will restart in Auto Sequence Mode + Motion Recording – this ensures that some form of recording will be immediately active on the system

NOTE: If you had a different display view or recording mode set when the power failure occurred, you will need to re-apply the previous display view and recording mode.

ƒA flashing Power Failure icon will appear on-screen – the Power Failure icon indicates that a power failure occurred while the system was actively recording (i.e. “REC” icon was on-screen)

REC

160602-1.AVI

Cam1

Power Failure icon

2009 07 17 16:32:05

Figure 16.0 Power Failure icon

NOTE: The flashing icon appears only if the system was actively recording when the power failure occurred. The flashing icon will disappear when you press buttons on the receiver or remote control.

54