Recording

Manual Recording

Manual Recording allows you to manually start/stop recording from one channel at a time. You cannot record while in Quad mode.

You can also record while in Zoom mode. For details on using Zoom, see “Zoom” on page 43.

NOTE: You cannot change channels or enable Auto Sequence Viewing Mode during Manual Recording.

REC

160602-1.AVI

Cam1

2009 07 17 16:32:05

Figure 7.0 Recording indicated by the OSD

To enable Manual Recording:

1.Select a channel (1~4) on the wireless receiver or from the remote control.

2.Press the Record— button on the remote control or RECORD—M button on the wireless receiver. A blue LED will light up under RECORD—M on the wireless receiver.

3.To stop Manual Recording, press the Record— button on the remote control or RECORD—M button on the wireless receiver again.

When Should I Use Manual Recording?

Emergency recording

Low traffic environments

22

Page 26
Image 26
LOREX Technology LW2301 instruction manual When Should I Use Manual Recording?