Remote Control
Remote Control
ATTENTION: Before using the remote | 1 |
|
control, remove the protective clear plastic tab from the battery cover.
| 2 |
1. 1/f : Move menu cursor UP; |
|
play/pause playback; jump to |
|
camera 1 while in Quad Mode. |
|
2. Enter: Confirm menu selections | 3 |
(same as OK on the wireless receiver).
3. | 4/ | : Move menu cursor LEFT; | 4 |
| decrease values in certain menu | ||
|
| ||
| options; rewind playback; jump to |
| |
| camera 4 while in Quad Mode. |
| |
4. | MENU / Back: Press to open the |
| |
| Main Menu; go back/close menu |
| |
windows. | 5 |
|
5.Record: Press Motion to enable motion recording – system will ONLY record when motion is
detected; press | to start/stop |
manual recording. |
|
6.Volume: Press to increase/decrease volume during
playback. Use the receiver to | 6 |
change volume of buzzer and motion alarm.
7.Quad: Press to change the display
view to quad | Figure 1.0 Remote Control |
8.2/ : Move menu cursor RIGHT; increase values in certain menu options; increase playback speed; jump to camera 2 while in Quad Mode.
7
8
9
10
11
12
9.3/ : Move menu cursor DOWN; decrease values in certain menu options; stop playback; jump to camera 3 while in Quad Mode.
10.Scan/Del: Press to delete recorded video files.
11.Channel: Press “A” to enable/disable Auto Sequence Viewing Mode; press M to manually change the channels (1~4).
12.AV: Not used.
NOTE: Unless otherwise noted, button names mentioned in steps in this manual will refer to buttons on the remote control.
12
