LOREX Technology LW2301 instruction manual Viewing Modes, View Mode diagram

Viewing Modes

Viewing Modes

There are three different viewing modes available on the system: single channel viewing, Auto Sequence Viewing Mode (view individual channels automatically in sequence), and Quad mode.

To change viewing modes:

ƒPress the Channel—A button to enable Auto Sequence Viewing Mode and switch automatically between channels; press Channel—M button to disable Auto Sequence.

OR

ƒPress the Channel—M button repeatedly to switch between channels 1~4

NOTE: By default, Auto Sequence Viewing Mode is enabled when you first power on the system.

Cam4

Channel 4

Cam3

Channel 3

A=Auto Sequence

PAIR

Press the Channel—M and A buttons on the receiver or remote control

M=Manual switching

Cam1

Channel 1

Cam2

Channel 2

Figure 5.0 View Mode diagram

18