•Do not use well water, industrial water, water from cooling circuits, or water contaminated by any chemicals or bacteria.
•Do not add disinfectants or anticorrosive compounds to the water, which are potential irritants.
•HP highly recommends installing a filter to be sure that water is free of particles.
Drain locations
The following figure shows the drain locations on the HP POD 240e NA.
Side view shown
Callout | Component | Description | Quantity per | Total quantity |
|
|
| side | per HP POD |
|
|
|
| 240e NA |
|
|
|
|
|
1 | Adiabatic media | Removes excess water from the | 2 | 4 |
| drain | adiabatic media drip tray |
|
|
2 | Rain water drain | Removes rain water from the HP POD | 2 | 4 |
|
| 240e NA |
|
|
IMPORTANT: Consult with your AHJ to determine the appropriate drainage system routing.
