Specifications, HPR152i and HPR153i

Frequency Response, -3dB Frequency Range, -10dB Maximum Peak SPL Nominal coverage, H x V Directivity Index Directivity Factor Transducer Description

Acoustic Crossover Freq. Amp Power

Input Sensitivity

Input Headroom/Clipping

Input Connector/Impedance

Output Connector

HPR152i

54-17.5k Hz

47-20k Hz

135dB

90°x60°

9.4

8.7

15” (381mm) transducer with 3” (76mm) voice coil 1” (25mm) throat compression driver

2,000 Hz

400 Watts, low frequency

100 Watts, high frequency

0.775 Vrms (+0dBu)

10 Vrms (+22.2dBu)

XLR female, 22k Ohm, balanced, line-level input (unbalanced, 11k Ohm)

XLR male, wired in parallel with Input connector

HPR153i

41-17.5k Hz

36-20k Hz

133dB

90°x40°

11.1

12.9

15” (381mm) transducer with 3” (76mm) voice coil 6.5” (165mm) transducer with 1” (25mm) voice coil 1” (25mm) throat compression driver

500 and 2,000 Hz

400 Watts, low frequency

100 Watts, mid frequency

100 Watts, high frequency

0.775 Vrms (+0dBu)

10 Vrms (+22.2dBu)

XLR female, 22k Ohm, balanced, line-level input (unbalanced, 11k Ohm)

XLR male, wired in parallel with Input connector

Controls, Indicators, and Adjustments

Protection, Agency certs. AC Power Requirements

Gain control, 100 Hz low-cut filter switch, Front LED on/off switch, Limit/Clip (red LED), Signal presence (green LED), AC Power (blue LED), AC Power switch, AC circuit breaker

Thermal limiting, On/Off muting, power limiting, DC protection, short circuit protection, ultrasonic protection, RF protection, UL/CE listed

AC Power Connector and Cordset

Factory supplied IEC cordset: 9’ (3m) #18AWG 120V North American or European 230V cordset

Dimensions (height, width, depth)

33.6” (853mm) x 19.1” (485mm) x 17.9” (455mm)

45.1” (1144mm) x 19.1” (485mm) x 17.9” (455mm)

Installation Clearance

Allow for 6.0” (152mm) of free space behind the enclosure to assure proper amplifier cooling

Weight

100 lb/45.4 kg

118 lb/53.5 kg

Finish and Grill

Wear-resistant textured paint finish on plywood enclosure and powder-coated perforated steel grill

Notes:

1- Maximum Peak SPL: Calculated by adding the loudspeaker’s sensitivity (1W at 1m) to the peak power (dBw) of the amplifier provided.

2- Directivity Index (DI): Difference between on-axis SPL and average SPL (considering all axes) for the specified coverage range. DI= 10 log Q

3- Directivity Factor (Q): Directivity index expressed as a power ratio Q=10 exp DI/10

4- Amplifier Power: The maximum sustained power at less than 1% clipping, averaged over the intended frequency range,

5- Input Sensitivity: The sine-wave input voltage required to reach amplifier clipping, measured within the frequency range used to determine Maximum Peak SPL, with the gain on “normal” and no gain reduction due to limiting.

6- Input Headroom/Clipping: Maximum input voltage.

7- Input Connector/Impedance: RF shunt capacitance should not reduce impedance by more than 30% at 20k Hz.

22

Page 22
Image 22
QSC Audio HPR122i, HPR152i, HPR153i, HPR151i, HPR181i user manual Specifications, HPR152i and HPR153i

HPR122i, HPR152i, HPR153i, HPR151i, HPR181i specifications

QSC Audio is renowned for delivering high-quality audio solutions, and their HPR series is a testament to this commitment. The HPR122i, HPR152i, HPR153i, HPR151i, and HPR181i are standout models in the lineup, catering to a variety of sound reinforcement needs.

Starting with the HPR122i, this model is a 12-inch two-way loudspeaker designed for portable applications. It features a built-in 1000-watt Class D power amplifier, delivering exceptional clarity and high output. The rugged birch plywood enclosure enhances durability, while the advanced waveguide technology ensures a wide dispersion pattern, making it ideal for both live sound and permanent installations.

Moving up, the HPR152i showcases a larger 15-inch woofer, perfect for larger venues where deep bass and punchy sound are required. It retains the same robust build quality and integrated amplification as its smaller counterpart, ensuring reliability during extended use. The HPR152i’s contoured design allows for versatile positioning, whether it's on stands or as a floor monitor.

The HPR153i takes it a step further, offering a three-way design for even greater fidelity. With a dedicated 15-inch woofer, a 6.5-inch midrange, and a 1-inch compression driver, the HPR153i delivers a rich and detailed sound across all frequencies. This model is especially favored in settings where clarity and precision are paramount, such as concert halls and theatres.

Not to be overlooked, the HPR151i is a powerful subwoofer that complements the full-range speakers in the HPR series. Its 15-inch driver, paired with a 1000-watt Class D amplifier, delivers deep, impactful bass, enhancing the overall sonic experience. The HPR151i is ideal for situations requiring enhanced low-frequency response, making it a great match for DJs and live performers.

Finally, the HPR181i subwoofer elevates the low-end even further with its 18-inch woofer. This model is designed for serious bass enthusiasts, providing thunderous lows that can fill large spaces. Its robust design and advanced thermal management allow for extended use without overheating.

All models in the HPR series incorporate QSC’s Digital Signal Processing (DSP) technology, ensuring optimal sound performance and system protection. With their rugged construction, advanced features, and powerful sound, the QSC HPR series stands out as a top choice for audio professionals seeking reliability and exceptional performance in live sound applications. Whether for music, speech, or multimedia, the HPR series effectively meets the demands of diverse sound environments.