SC-322X
Cinema Loudspeaker System
Features
•Passive, 2-way, screen channel system
•HF-63X2 provides 90° horizontal by +15° to -35° vertical coverage
•LF-3215 is constructed of MDF and features single woofer chambers
•Low-distortion waveguide provides highly articulate dialogue
•Shallow depth (20") facilitates installation
Developed specifically for the unique requirements of professional motion picture playback, the SC-322X extends QSC’s commitment to the cinema market. As a member of the DCS Digital Cinema Speaker Series, the SC-322X is a passive, 2-way screen channel loudspeaker system comprised of two main units—the HF-63X2 high-frequency system and the LF-3215 low- frequency system.
The HF-63X2 high-frequency system features a 2.5" (63mm) titanium diaphragm compression driver mounted on a custom designed high-frequency cinema horn with an adjustable pan and tilt bracket. The HF-63X2 includes a driver protection and equalization network. DC blocking capacitors protect against DC or low-frequency signals that would likely destroy an unprotected driver. Power limiter circuitry protects the driver from overpowering and a response correction filter smoothes the frequency response of the horn/driver combination. The driver and equalization network provides for more reliable operation, ensuring the show will go on. The LF-3215 dual 15" (381 mm) low-frequency enclosure is designed specifically to address the extended low- frequency response required for cinema applications.
The LF-3215 covers the frequency range from 35 Hz to 1000 Hz, depending upon the high-frequency system requirements. Close Coupled Woofers (CCW), with their tight spacing between woofers, improves coupling and keeps coverage angles wide over a greater frequency range than more widely spaced designs.
The SC-322X is designed for ease of installation. The HF-63X2 components come pre-assembled to reduce field assembly time. Three bolts are all that are required to secure the HF-63X2 to the top of the LF-3215 enclosure.
Specifications | SC-322X | |
| | |
Nominal Coverage | 90° horizontal x +15 to -35° vertical | |
| | |
Frequency Range | 32 Hz – 16 kHz (-6 dB) | |
| | |
Impedance | 4Ω | |
| | |
Sensitivity 1 watt /1 meter, | 97.5 dB | |
half space | | |
| | |
Maximum Input Power1 | | |
2 hours of 6 db crest factor | 300 W RMS | |
pink noise, 50 Hz – 20 kHz, | | |
AES method | | |
Recommended Amplifier Power | 600 W RMS maximum | |
| |
Recommended Processing | Subsonic filter below 30 Hz, > 18 dB per octave |
| | |
| LF-3215 | HF-63X2 |
| | |
Connectors | Barrier strip screw terminals | Barrier strip screw terminals |
| accept up to #10 AWG | accept up to #10 AWG |
| stranded wire | stranded wire |
| | |
Transducers | Two 15" (381mm) high efficiency, | 1.5" (38mm) exit, 2.5" titanium |
| extended bass woofer featuring | diaphragm compression driver |
| 3" copper voice coils | |
| | |
Enclosure | Quasi B4 alignment, ported | Tilt/Pan Bracket |
| enclosure with fully flared ports, | ±10° vertical tilt |
| symmetrical port design, tuned to | ±10° horizontal pan |
| 36 Hz, constructed of MDF and | |
| heavily braced. Features vandal | |
| resistant woofer mounting bolts | |
| | |
Dimensions (HWD) | 36" x 30" x 20.3" | 16" x 30" x 20" |
| (910 mm x 762 mm x 516 mm) | (406 mm x 762 mm x 508 mm) |
| | |
Weight – Net | 172 lb (78 kg) | 40 lb (18.4 kg) |
| | |
System Weight | 212 lb (96.4 kg) | |
| | |
Baffle Cut-Out | 53" x 32" | |
1) Maximum input power tested in accordance with IEC 268-5 recommendations, 50 Hz – 20 kHz band limiting, 6 dB signal crest factor.
