MH-1075 Specifications (subject to change without notice
Freq. Range | 180 - 15k | |
Nominal Coverage | 90° horizontal X +20 to | |
| The horizontal plane can be adjusted by altering mounting position on the low frequency enclosure before | |
| tightening bolts. | |
DI: | 9 dB (400 to 16k Hertz average) | |
Q: | 8 (400 to 16k Hertz average) | |
Max. Output: | Mid Freq. 135.5 dB SPL calculated peak, 1m, full space | |
| High Freq. 133 dB SPL calculated peak, 1m, full space | |
| ||
Impedance: | ||
| 6.4 ohms minimum at 1500 Hertz | |
| 91 ohms maximum at 150 Hertz | |
Maximum Input Power | ||
| ||
| ||
Sensitivity | ||
| High Freq. 108 dB SPL, 1 watt, 1 meter | |
| ||
Crossover Frequencies | ||
| ||
Crossover Network | 1.7k Hertz, 18 dB/octave electrical slope, HF driver power limiting circuit (never disrupts continuity). Swit- | |
| chable operation between | |
| signal, leaving power limiter and DC blocking capacitors. | |
Connectors | Barrier strip screw terminals accept up to #10 AWG stranded wire. Four terminals, two HF input and two | |
| MF input (for | |
Transducers | MF: 10" high efficiency midrange, | |
| HF: 1.5" (38mm) exit, 3" (76mm) titanium diaphragm compression driver. | |
Mounting Hardware: | Attaches to top of the low frequency cabinet using three | |
Size | 39” high x 30” wide x 20” deep (991 x 762 x 508mm) | |
Weight | 85 lb. (39 kg) net |
6