Unpacking
There are no special unpacking precautions. However, it is recommended you keep the original packing material for reuse in the rare event that service be required. If service is required and the original packing material is not available, ensure that the unit is adequately protected for shipment (strong box of appropriate size, sufficient packing material to prevent
What is included in the carton: |
| |
Item | Description | Quantity |
1 | RAVE 520uz | 1 |
2 | 4 | |
3 | Hardware Manual (this document) | 1 |
4 | QSControl.net Software CD | 1 |
5 | IEC Power Cord 3 x #18 AWG | 1 |
6 | 10 | |
7 | 10 | |
Mounting
The RAVE 520uz can be used in or out of an equipment rack. Rack mounting is optional. Adhesive rubber feet are included for
Rack Mounting
Rack mount the RAVE 520uz by supporting it from underneath while aligning the mounting holes with the threaded screw holes in the rails; install all four mounting screws and washers and tighten securely. Ensure use of all four mounting screws in order to minimize the chance of bending or distorting the rack mount ears. If the RAVE 520uz is to be transported while in a rack, we recommend supporting the rear of the chassis. This will help prevent the unit from being damaged from the increased mechanical stresses of portable and mobile use. The RAVE 520uz’s chassis includes integral rear mounting tabs for securing to the rack mounting ears.
Be certain not to block the cooling air ventila- tion openings on the sides of the chassis.
Be certain not to block the cooling air ventila- tion openings on the sides of the chassis.
11
