Quantaray manual N52FN/N62FN Tool Specifications

Models: N52FN N62FN

1 34
Download 34 pages 9.82 Kb
Page 4
Image 4

N52FN/N62FN TOOL SPECIFICATIONS

All screws and nuts are metric.

 

MODEL

 

LENGTH

 

 

HEIGHT

WIDTH

 

WEIGHT

 

N52FN

 

14-11/16” (373mm)

 

10” (254mm)

3-1/4” (83mm)

3.7lbs (1.69kg)

 

 

N62FN

 

14-11/16” (373mm)

 

11-5/8” (295mm)

3-1/4” (83mm)

3.8lbs (1.75kg)

FASTENER SPECIFICATIONS:

 

 

 

 

TOOL MODEL

NAIL SERIES

GAUGE

WIRE SIZE

 

FASTENER RANGE

N52FN

FN1600

16

 

.060 (1.52mm)

1”-2” (25mm-50mm)

N62FN

FN1500

15

 

.072 (1.82mm)

1” - 2-1/2” (25mm-63mm)

TOOL AIR FITTING:

This tool uses a 1/4” N.P.T. male plug. The inside diameter should be .200” (5mm) o larger. The fitting must be capable of discharging tool air pressure when disconnected from the air supply.

OPERATING PRESSURE:

70 to 120 p.s.i.g. (4.9 to 8.4 kg/cm2). Select the operating pressure within this range for best fastener performance. DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.

AIR CONSUMPTION:

Model N52FN requires 4.0 cubic feet per minute and Model N62FN requires 5.3 cubic feet per minute of free air to operate at the rate of 60 fasteners per minute, at 80 p.s.i.g. To calculate the actual rate at which the tool will be run to determine the amount of air required, for example; if your usage averages 30 fasteners per minute, you need 50% of the 4.0 c.f.m. or 5.3 c.f.m. which is required for running at 60 fasteners per minute.

OPERATION

BOSTITCH OFFERS THREE TYPES OF OPERATION FOR THIS SERIES TOOL.

CONTACT TRIP

The common operating procedure on “Contact Trip” tools is for the operator to contact the work to actuate the trip mechanism while keeping the trigger pulled, thus driving a fastener each time the work is contacted. This will allow rapid fastener placement on many jobs, such as sheathing, decking and pallet assembly. All pneumatic tools are subject to recoil when driving fasteners. The tool may bounce, releasing the trip, and if unintentionally allowed to recontact the work surface with the trigger still actuated (finger still holding trigger pulled) an unwanted second fastener will be driven.

SEQUENTIAL TRIP

The Sequential Trip requires the operator to hold the tool against the work before pulling the trigger. This makes accurate fastener placement easier, for instance on framing, toe nailing and crating applications. The Sequential Trip allows exact fastener location without the possibility of driving a second fastener on recoil, as described under “Contact Trip”. The Sequential Trip Tool has a positive safety advantage because it will not accidentally drive a fastener if the tool is contacted against the work – or anything else – while the operator is holding the trigger pulled.

TRIGGER OPERATED

The Trigger Operated model is cycled by actuation of the trigger ONLY. This model does not have a Contact Arm and is intended for use only where a Contact Arm CANNOT be used to satisfy the requirements of the application.The Trigger Operated tool will cycle each time the trigger is actuated.

MODEL IDENTIFICATION:

Refer to Operation Instructions on page 4 before proceeding to use this tool.

CONTACT TRIP

SEQUENTIAL TRIP

TRIGGER OPERATED

Identified by:

Identified by:

Identified by:

BLACK TRIGGER

GRAY TRIGGER

BLACK TRIGGER

-4-

Page 4
Image 4
Quantaray manual N52FN/N62FN Tool Specifications

N52FN, N62FN specifications

The Quantaray N62FN and N52FN are versatile and affordable options for photography enthusiasts seeking to expand their creative toolbox without breaking the bank. These models are particularly suited for those who appreciate a blend of functionality, innovation, and ease of use in their photographic equipment.

The Quantaray N62FN is designed primarily for Nikon users, providing compatibility with a wide range of Nikon DSLR cameras. This lens features a focal length of 18-55mm, making it an excellent choice for everyday photography, from landscapes to portraits. The f/3.5-5.6 aperture ensures that users can capture images in a variety of lighting conditions, while the lightweight construction allows for easy portability. This lens also incorporates a 7-blade diaphragm, which creates beautiful bokeh in out-of-focus areas, enhancing the overall aesthetic of images.

The Quantaray N52FN lens, also compatible with Nikon cameras, offers a longer focal range of 55-200mm, making it ideal for capturing subjects from a distance, such as wildlife or sports events. This telephoto lens features a similar f/4-5.6 aperture, providing notable performance in both bright and low-light environments. Additionally, both models incorporate multi-coated lens elements that help reduce flares and ghosting, ensuring sharp, clear images with vibrant colors.

Both the N62FN and N52FN utilize a lightweight and durable design, allowing photographers to carry them comfortably for prolonged periods. They feature a robust build quality that withstands the rigors of frequent use in various shooting scenarios. The intuitive manual focus mechanism on both lenses provides a smooth and precise experience, while the autofocus capabilities ensure quick and efficient subject acquisition for dynamic photography needs.

In terms of technology, both lenses are built with advanced optical design principles, ensuring that they deliver exceptional image quality across the entire zoom range. The inclusion of aspherical lens elements in their construction minimizes distortion and aberrations, resulting in images that are clear and richly detailed.

Overall, the Quantaray N62FN and N52FN are powerful tools for photographers looking to enhance their imaging capabilities. Their balance of quality, performance, and affordability makes these lenses an appealing choice for both novice and experienced photographers alike, catering to a diverse array of photographic needs and styles.