Quantum 6-01658-01 manual Deleting an Existing Schedule

Deleting an Existing Schedule

Chapter 4 Common StorNext Tasks

Scheduling StorNext Events

6Select either Days of the Week or Days of the Month.

•If you selected Days of the Week, view or change the days on which you want the event to run. To select multiple days, hold down the CTRL key when you select subsequent days.

•If you selected Days of the Month, view or change the calendar dates on which you want the event to run. To select multiple dates, hold down the CTRL key when you select subsequent dates.

7At the Run Time field, view or change the time of day you want the event to begin.

8At the Start Window field, view or change the window in which you want the StorNext Scheduler to start the event. The Scheduler attempts to begin the event within the specified Start Window time (e.g, 30 minutes). If the event cannot begin at that time, the Scheduler tries again during the next cycle.

9Do one of the following:

•Click Apply to save your changes and modify the new schedule. When the Status screen displays Success, click Close.

•Click Cancel to exit the screen without saving your changes. The Feature Schedules window closes.

•Click Back to return to the previous screen. (When you click Back you lose any changes you made on the Modify screen.)

The procedure for deleting an existing schedule for an event is the same regardless of the event type. For every event type except Partial Backup you must have at least one schedule, so you will not be allowed to delete a solitary schedule.

1From the StorNext Home Page, select Schedule Events from the Admin menu. The Feature Schedules screen appears.

2Select an event type:

•Clean Info

•Clean Versions

•Full Backup

•Partial Backup

StorNext User’s Guide 62