Chapter 8 Managing Drives and Disks
Working with Tape Drives
StorNext User’s Guide 192
4After the Status Screen informs you that the drive’s status was
successfully changed, click Close. The Change Drive State screen
shows the changed state for the drive you selected.
5If desired, repeat steps 2 - 4 to change the state for additional tape
drives.
Cleaning a Tape Drive 8Use this procedure to manually clean a tape drive.
1From the SNSM home page, choose Drive > Clean Drive from the
Admin menu. The Clean Drive screen appears.
Figure 138 Clean Drive Screen
2Select from the Select Drive List the drive you want to clean, and
then click Apply. The Clean Drive status screen appears.
3After the Status screen notifies you that the drive has been cleaned
successfully, click Close.
Note: To perform this procedure, you must have at least one
cleaning tape specifically labeled for cleaning. For example,
CLN_XXX.