Chapter 6 Running the Demonstration Programs
Running the Demo 6 Program
104 ATL M-Series User’s Guide
Running the Demo 6 Program 6
The Demo 6 program causes the X, Y, and Theta axes to move
randomly.
To r un t he De mo 6 program:
1Access the Demo Programs screen (see Accessing the Demo
Programs Screen on page 97).
2Press the Up or Down buttons to select Demo 6.
3Press Select.
The Demo 6 program starts.
4To stop the program, press Stop.
The GUI displays a status screen listing the demonstration
program number, the number of cycles completed, and the
status of the test: pass or fail.
5Press Back to return to the Demo Programs screen.