I V . C O M F O R T A D J U S T M E N T S

Positioning Belt

 

 

 

 

Your wheelchair may be equipped with a positioning

belt that can be adjusted for operator comfort. See fig-

ure 43. The positioning belt is designed to support the

operator so that he/she does not slide down or forward

in the seat. The positioning belt is not designed for use

as a restraining device in a motor vehicle.

 

WARNING!

If

your

wheelchair

is

equipped with a transit securement

system, the positioning belt should

only be adjusted by a Quantum Rehab

Provider or a qualified technician.

 

To install the positioning belt:

 

 

1. Remove and discard the screws on both the left and

right back canes. See figure 43.

Figure 43. Positioning Belt Installation

NOTE: If your wheelchair is equipped with dual-post armrests, the existing back cane screws must be replaced with screws that are 2 in. (5 cm) long to properly install the positioning belt.

2. Insert the longer screws through the positioning belt and then through the back canes on each side of the wheelchair seat. See figure 43.

3. Tighten both screws.

4. Install the positioning belt onto the bracket and pull until the positioning belt snaps into place.

To adjust the positioning belt for operator comfort:

1.

Once seated, insert the metal tab on one side of the

 

 

belt into the plastic housing on the opposite side

 

2.

until you hear a click. See figure 44.

Figure 44. Positioning Belt Adjustment

Pull the excess strap attached to the metal tab until

 

it is secure, but not so tight as to cause discomfort.

To release the positioning belt:

1. Push the button mechanism on the plastic housing.

MANDATORY! Make sure the positioning belt is properly secured to the wheelchair and is adjusted for operator comfort before each use.

MANDATORY! Inspect the positioning belt for loose parts or damage, including tears, worn spots, bent hardware, or damaged latch mechanisms, before each use of the wheelchair. If you discover a problem, contact your Quantum Rehab Provider for maintenance and repair.

30

www.pridemobility.com

Litestream XF

Page 30
Image 30
Quantum INFMANU2788 manual Positioning Belt

INFMANU2788 specifications

Quantum INFMANU2788 is a state-of-the-art device that represents a significant leap forward in the realm of quantum computing and information management. This advanced system is designed to harness the power of quantum mechanics to optimize data processing, communication, and storage. With its cutting-edge technology, the INFMANU2788 is tailored to meet the needs of modern enterprises looking to leverage quantum capabilities for competitive advantage.

At its core, the INFMANU2788 operates on a hybrid quantum architecture that combines superconducting qubits with advanced classical processing units. This unique integration allows for faster execution of complex algorithms that were previously unfeasible with classical computers. The superconducting qubits are engineered to maintain coherence over extended periods, enabling the system to perform intricate calculations without significant loss of information.

One of the standout features of the Quantum INFMANU2788 is its scalability. The device boasts a modular design that allows for the easy addition of qubits, meaning organizations can expand their quantum capabilities as their needs grow. This flexibility ensures that users can efficiently manage increasing amounts of data while maintaining performance benchmarks.

In terms of connectivity, the INFMANU2788 is equipped with a state-of-the-art quantum interconnect that facilitates rapid data transmission between qubits. This advanced interconnect technology ensures low latency and high bandwidth, crucial for real-time processing applications. Furthermore, the system supports quantum entanglement, which enables parallel data processing and enhances computational power exponentially.

The Quantum INFMANU2788 also prioritizes security through quantum cryptography, a feature designed to safeguard sensitive information. By utilizing the principles of quantum mechanics, the device ensures that any attempt to intercept data communications is detectable, providing an unprecedented level of security that is essential for financial institutions, healthcare providers, and other sectors that handle sensitive information.

To support users in harnessing the full potential of quantum computing, the INFMANU2788 comes equipped with a comprehensive suite of software tools. This includes user-friendly interfaces for programming quantum algorithms, simulation environments for testing, and robust analytics capabilities to derive insights from quantum computations.

In conclusion, the Quantum INFMANU2788 is a groundbreaking innovation in quantum technology, offering unmatched performance, scalability, and security. Its advanced features, coupled with its transformative potential, make it an indispensable tool for organizations seeking to lead in the age of quantum computing. As industries continue to explore the capabilities of quantum technologies, the INFMANU2788 positions itself at the forefront, ready to shape the future of data management and computational processes.