PX500 Series DLTSage™ Tape Security Quick Start Guide
Enable/Disable Secure Key for Drives
Refer to figure 5 for information on Enable/Disable Secure Key for Drives.
Figure 5 Enable/Disable Secure
Key for Drives
The Secure Key can only be used with tape drives that are Secure Key capable. This section lists the tape drives in the library that are Secure Key capable. A checkmark in the Secure Key column indicates a Secure Key is enabled for the tape drive.
1The Secure Key can be enabled or disabled for all tape drives by clicking the corresponding radio button.
2Click the Secure Key check box for individual tape drives to enable/disable Secure Key for a tape drive.
3Click Update to activate the changes.
NOTE: The system must be offline to Enable/Disable Secure Key setting for drives.
Modify Secure Key for
Library
Refer to figure 6 for information on Modify Secure Key for Library.
Figure 6 Modify Secure Key for
Library
To modify the Secure Key used by the library:
1Select the Secure Key name from the list of available names.
NOTE: Selecting None to will cause the library to NOT use a Secure Key.
2Click Update.
NOTE: The system must be offline to modify a Secure Key.
Assign Secure Key to
Cartridge
Refer to figure 7 for information on Assign Secure Key to Cartridge.
Figure 7 Assign Secure Key to
Cartridge
Click Find to list all secured cartridges and their assigned Secure Key names.
To assign a Secure Key to a cartridge:
1Enter the barcode of the cartridge. Separate multiple barcodes with either spaces or commas.
2Select a Secure Key name from the list of available names.
3Selecting Remove will remove the association between the cartridge and a Secure Key name in the cartridge database.
4Click Update to accept the changes.
Create Secure Key Name/
Secure Key Pair
Refer to figure 8 for information on Create Secure Key Name/Secure Key Pair.
4
