Quantum Q4 www.pridemobility.com 17
21°
V. COMFORT ADJUSTMENTS
Seat Angle (Dump) Adjustment
Your seat may be equipped with mechanism that allows
you to adjust the seat angle (dump) from -5° to +21° in
2.5° increments.
NOTE: The exact tilt angle adjustment range may vary
depending on seating system and seat height.
NOTE: For more information on operating the power posi-
tioning systems, refer to the information supplied in supple-
mental manuals or contact your Quantum Rehab Provider.
Seat Height Adjustment
Your seat may be adjusted to one of three heights.
To adjust the seat height:
1. Remove the occupant from the power chair.
2. Remove the detent pin from the front seat interface. See
figure 7.
3. Pivot the seat rearward and remove the seat from the
power base by removing the hardware that attaches the
rear seat securement brackets to the interfaces on the
bottom of the rear of the seat. See figure 7.
4. Remove the hardware that attaches the rear seat secure-
ment brackets to the power base.
5. Adjust the seat to the desired height.
6. Reinstall the hardware that attaches the rear seat
securement brackets to the power base.
7. Reinstall the hardware that attaches the rear seat
securement brackets to the interfaces on the bottom of
the rear of the seat.
8. Reinstall the front seat interface to the top of the tilt
actuator using the detent pin. See figure 7.
Figure 14. Seat Width Adjustment Figure 15. Leg Rest Width Adjustment
Figure 13. Seat Angle (Dump) Adjustment