Status LEDs
PC Indicates if QT3View software is communicating with the QTM300CA.
This LED will turn off five seconds after communications have stopped.
DEV0, DEV1 Displays the chip type connected via the ribbon cable or in the onboard socket:
DEV1 | DEV0 | Device |
- | - | None |
- | On | QT300 |
On | - | QT310 |
On | On | QT320 |
|
|
|
PROG Indicates the programming status of the target chip in
The PROG LED will light during the cloning process in
Afterwards the LED will flash on/off 3 times to indicate completion:
Fast flashing: (0.1s between flashes) the clone process was a success.
Slow flashing: (1s between flashes) the clone process failed.
If the QTM300CA is not in communication with QT3View software, the PROG LED will flash on and off.
lq | 4 | QTM300CA/R1.02 25.09.03 |