Quantum quick start Using the FTP Client, File Panes, client, SDLT 600A Tab

SDLT 600A Tape Drive Quick Start Guide

Figure 8 Internet Protocol (TCP/IP) Properties

Enter the IP address and Subnet mask

When loaded, the FTP client connects you to the SDLT 600A server when the login name (root) and password (password) are correctly entered. You can rename or reset the login and password from the Configuration tab menu.

Once connected, you can choose Local instead of the SDLT 600A server to disconnect the FTP client.

Figure 9 SDLT 600A/FTP Client

5 Launch a Web browser (Internet Explorer or Firefox).

6 Type in the IP address of the drive (http://10.10.10.10) in

	the address line of the browser.
	NOTE: If you require additional assistance when changing
	IP settings, you may need to consult either your
	network administrator or an authority on IP policies
	and standards.
		File Panes
		There are three text zones on the top of each pane:
	CAUTION: Any change of the IP address could result in the
	loss of the device; always double-check that the IP	• The first zone allows you to select the system or
	number is entered correctly	server.
		• The second zone allows you to select the drive (only
		available on Local).
		• The third zone displays the currently navigated path
Using the FTP Client
		and allows you to type the path within the address
		bar.
The SDLT 600A Client/FTP client allows you to transfer files to		The panes can be local or remote views and you can interact
and from the tape drive, partially restore MXF files, and view
		with the system as follows:
the MXF metadata.
		• Double-click a folder to expand it to view the enclosed
In the SDLT 600A main page, click SDLT 600A Client, then FTP
		folders and files
client.
		• Double-click a folder at the top followed by leader
		dots that lead toward the parent folder

SDLT 600A Tab

SDLT 600A is the main tab view with a standard FTP client interface, providing two file panes. The left pane displays your local disk directory and the right pane shows the SDLT 600A directory.

•Click an item (file or folder) to select it

•Use <Ctrl> for non-continuous and <Shift> for continuous item selection

•Use < Ctrl + A> to select all files and folders

5