13

Test Menu

Press the Test button to select special test operating modes.

Using Test Sequences

Running Test Sequence Manually

The generator includes a test sequence, which specifies a series of format and image combinations.

To run the test sequence, select Test > Sequence > Run, and then press the +/- buttons to step

through the sequence. Use the menu buttons to gate video color information, change sync types, and

turn all signal outputs on and off.

You can use VGM to modify the test sequence (see page 19).

_Red__SEQ_NAME__ACS
_Grn__Step#xxx__DCS
_Blu___Format___DSS*
_______Image____OUT*
Red Color
Component
ON/OFF
Green Color
Component
ON/OFF
Blue Color
Component
ON/OFF
ASC - Select Composite
Analog Sync
(Composite Video)
DCS - Select Digital
Composite Sync
DSS - Select Digital
Separate (H&V) Sync
OUT - All test signal
outputs ON/OFF
Line 1: Name of Test Sequence currently running.
Line 2: Current step number in sequence
Line 3: Video format used in current step
Line 4: Test image used in current step
_Sequence______CS1 Probe
_Burn-In DDC_Step
_Freq Shift
_Audio PR Noise
Sequence Mode
Sub-Menu
Burn-In Mode
Sub-Menu
Freq Shift Mode
Sub-Menu
Audio Set-up
Sub-Menu
Probe
CS-1 Readings
Sub-Menu
DDC Step
Mode
Sub-Menu