Quantum Data 700A Testing Audio, Testing HDCP Interfaces

Select Test > Audio to independently toggle stereo audio output channels on and off.

On a 701A generator, the left channel is also the monophonic audio source for the modulated RF

output.

Model 701A video test generators may be equipped with an optional production (private) key for

testing High-bandwidth Digital Content Protection (HDCP) interfaces of DVI receivers that support

HDCP. For more information about HDCP, see http://www.digital-cp.com/.

To output HDCP-encyrpted video content:

1. Connect the DVI connector of the generator with the DVI connector of the device under test.

2. Choose a DVI video format supported by the device.

3. Press Test > HDCP > Start to output HDCP encrypted content.

The display on the generator indicates if the test passed or failed. If the test passed, the currently

selected pattern is displayed on the device under test. Noise is displayed if the HDCP authenti-

cation failed.

After the initial authentication of the connection is established, the generator displays the number

of authentication verficiation cycles until you stop the test.

During the test, if you reconnect the cable or restart the device under test, the test should restart

automatically.

4. To stop the test, press the Exit soft key or any gray key.

Special Tests

______Y:_24.141_fL

______x:_.293

______y:_.279

_Read_______fL/nits

fL/nits - Toggle

between foot-

Lamberts and

nits for units of

measure and

take new reading.

Read - Take new

reading.