2. Select Tools > Archiver > Gateware Upgrade.
3.Click Browse, and then specify the gateware file (*.xsvf) you want to install.
4.In the Generator Selection box, select the target generator, and then click Program. VGM displays this message when the update is complete.
After VGM copies the gateware file to the generator, VGM will disconnect from the generator.
5.Read the release notes provided with the gateware update before proceeding.
If the gateware update does not require a firmware update, restart the computer, which restarts the generator, and activates the new gateware.
If the gateware update requires a firmware update, do not restart the computer, or you may be unable to install the firmware update. Refer to the release notes for special instructions.
6.Reconnect the generator with VGM.
10 Chapter 2 Operating Procedures