Quantum Data 880 quick start Web Interface, Establishing a Network Environment

Models: 880

1 29
Download 29 pages 54.42 Kb
Page 19
Image 19
Web Interface

Web Interface

The generator has a built-in Web server that enables you to interact with the generator using a PC and an Ethernet connection. The Web interface includes the following functions:

Virtual Front Panel for operating the generator remotely.

Generator FTP Browser for copying files between media within the generator, between generators, and between a generator and a PC.

Format Editor for creating formats and modifying and viewing format parameters. For more information about the Format Editor, Refer to the User's Guide for instructions on using the Format Editor.

CMD Terminal for operating the generator using the command line interface.

Calibration reports (Currently not available)

This section describes how to operate the Virtual Front Panel and the Generator FTP Browser.

Establishing a Network Environment

To utilize the Web interface features you have to create a network environment for your generators. You must physically connect the generators to the network, and then config- ure their IP addresses and the IP address of the file server (which must be different). Procedures for these tasks are described in this section.

In a typical networked environment, you will connect the generators to the corporate, IP- based Ethernet LAN. In this scenario, you connect a standard Ethernet patch cable between the Ethernet port on the generator and a LAN access jack or to a local hub. The file server is also connected to the LAN in the same manner.

Model 880 Series Quick Start Guide

19

Page 19
Image 19
Quantum Data quick start Web Interface, Establishing a Network Environment, Model 880 Series Quick Start Guide