9.Attach each Frame curtain to the window sash using screws 
(Type C). (See Fig. 6)
CAUTION: DO NOT DRILL A HOLE IN THE
BOTTOM PAN.
The unit is designed to operate with approximately 12.7mm (1/2") of water in bottom pan.
10. Slide the unit into the cabinet. (See Fig. 7)
CAUTION: For security purposes, reinstall screws (Type A) at cabinet's sides.
11.Cut the 
to the proper length and insert between the upper window sash and the lower window sash.
(See Fig. 8)
Type C 7
Fig. 6
Power cord | |
Screw (Type A) |
|
Screw (Type A) | Fig. 7 |
| |
Fig. 8 |
Features and Installation
12.Attach the window locking bracket 
with a type C screw. (See Fig. 9)
13.Attach the front grille to the cabinet by inserting the tabs on the grille into the tabs on the front of the cabinet. Push the grille in until it snaps into place. (See Fig.10)
NOTE: Please refer p.6 for setting ventilation kit.
14.Lift the inlet grille and secure it with a type A screw through the front grille.
(See Fig. 11)
15.Window installation of room air conditioner is now completed. See ELECTRICAL DATA for attaching power cord to electrical outlet.
Window locking bracket 12
Fig. 9
Fig. 10
Fig. 11
12
