4220 Multiplexer

Access Speed

T1

Network Interface

 

Network Port

1 T1 ANSI 403 port

Line Rate

T1 (1.544 Mbps ± 50 bps)

Connector Type

100 ohm RJ-48C socket

Line Code

AMI or B8ZS

Framing

D4 or ESF

Output Level

0 db, -7.5 db, or -15 db LBO

Input Level

0 to -26 db

System Timing

Network, DTE, Aux, internal

Drop-and-insert Interface

 

Line Rate

T1 (1.544 Mbps ± 50 bps)

Connector Type

100 ohm RJ-48C socket

Line Code

AMI or B8ZS

Framing

D4 or ESF

Data Interface

 

Interface Types

RS-449/EIA-530 or V.35

DTE Port 1, DTE Port 2

DB-25 socket

Data Rates

Nx56/64 kbps (N=1 through 24)

Management Connectors

 

COMM Port

RJ-45 socket

Ethernet

RJ-45 socket

WAN Protocols

Frame Relay, Cisco-HDLC, and Protocol

 

transparent support

Power Requirements

 

Voltage

100 VAC to 240 VAC, 50-60 Hz or -40

 

VDC to -72 VDC (both on the same platform)

Consumption

9 W maximum

Regulatory

FCC Part 15, FCC Part 68, UL 1950

 

Third Edition, Industry Canada CS-03

 

VCCI Class 1 CAN/CSA C22.2 No. 950-95

Diagnostics

 

Loopback Tests

T1 network, T1 payload, fractional T1

 

payload, loop-up/loop-down commands, DTE

 

(full or fractional), NET/DTE

Loopback Control

T1 set/reset codes, ESF FDL per

 

AT&T 54016 and ANSI T1.403 Annex B

Test Patterns

1:1, 1:2, 1:4, 1:7, 3:24, QRW, all 0s, all 1s,

 

smart jack, two user-programmable 24-bit pat

 

terns, bit error injection

Network Alarms

Net carrier loss, net sync loss, net AIS

 

received, net yellow received, CRC,

 

BPV, OOF threshold

Data port alarms

RTS loss, DTR loss

Front-panel LEDs

Power/test, in-band, network status,

 

network loopback, loopback acknowledge,

 

DTE loopback, TD, RD,CTS, RTS, DTR

Physical

 

Dimensions

1 RU, rack mountable

 

22.3 cm (8.75 in ) W, x 33 cm (13 in) D, x 4.13

 

cm (1.63 in) H

Weight

2.27 kg (5 lbs.)

Environmental

 

Operating Temperature

0º - 50º C

Storage Temperature

-20º - 60º C

Relative Humidity

0 - 95% non-condensing

Maximum Altitude

4.6 Km (15,000 ft)

 

 

E1

1E1 G703/G704 port

E1 (2.048 Mbps ± 50 bps)

120 ohm RJ-48C socket or 75 ohm BNC HDB3

ITU-T G.704/CTR 12

ITU-T G.703/CTR 12 0 to 20 dB

Network, DTE, Aux, internal

E1 (2.048 Mbps ± 50 bps)

120 ohm RJ-48C socket or 75 ohm BNC HDB3

ITU-T G.704/CTR 12

RS-449/EIA-530, V.35, or X.21 DB-25 socket

Nx64 kbps (N=1 through 31) (structured), 32x64 kbps (unstructured)

RJ-45 socket

RJ-45 socket

Frame Relay, Cisco-HDLC, and Protocol transparent support

100 VAC to 240 VAC, 50-60 Hz or -40

VDC to -72 VDC (both on the same platform) 9 W maximum

European harmonized standards 73/23 EEC, 91.31/EED, 89/336/EED, 93/68/EEC, and 91/263/EEC; UL 1950 3rd Ed.; CAN/CSA C22.2 No. 950-95; Comision Federal de Telecommunicaciones; CISPR 22 Level B (EN 55022), RoHS compliant

E1 network, E1 payload, fractional E1 payload, loop-up/loop-down commands, DTE (full or fractional)

E1 set/reset codes

1:1, 1:2, 1:4, 1:7, 3:24, QRW, all 0s, all 1s, two user-programmable 24-bit patterns, bit error injection

Loss of signal, loss of frame, remote alarm indication, alarm indication signal, CRC4, CV, FE

RTS loss, DTR loss

Power/test, in-band, network status,

network loopback, loopback acknowledge, DTE loopback, TD, RD,CTS, RTS, DTR

1 RU, rack mountable

22.3cm (8.75 in ) W, x 33 cm (13 in) D, x 4.13 cm (1.63 in) H

2.27 kg (5 lbs.)

0º - 50º C

-20º - 60º C

0 - 95% non-condensing

3048 m (10,000 ft)

Headquarters

Quick Eagle Networks (USA)

830 Maude Avenue

Mountain View, CA 94043

+1 650-962-8282 Phone

+1 650-962-7950 Fax

info@quickeagle.com

www.quickeagle.com

Northern, Central & Eastern Europe

info_uk@quickeagle.com

Southern Europe, Middle East & Africa

info_france@quickeagle.com

Asia / Pacific Rim

info_apac@quickeagle.com

Latin, Central & South America

info_southamerica@quickeagle.com

Canada

info_ca@quickeagle.com

© 2007 Quick Eagle Networks. All rights reserved. PDF/05/07

The information presented herein may change without notice and should be used for informational purposes only. 4220 Access Multiplexer is a trademark of Quick Eagle Networks.

Page 3
Image 3
Quick Eagle Networks 4220 Headquarters, Northern, Central & Eastern Europe, Southern Europe, Middle East & Africa, Canada

4220 specifications

Quick Eagle Networks 4220 is an advanced networking solution designed to cater to the ever-evolving demands of modern enterprises. This high-performance network appliance integrates cutting-edge technologies to ensure seamless connectivity, robust security, and unparalleled reliability.

One of the standout features of the Quick Eagle Networks 4220 is its innovative architecture, which supports a wide range of applications. It operates on a multi-layered framework that enables efficient data management, enhancing both speed and performance. The device is equipped with channel bonding capabilities, allowing multiple channels to function simultaneously. This significantly increases bandwidth availability, which is particularly beneficial for businesses dealing with large-scale data transfers or extensive video streaming tasks.

In terms of security, the Quick Eagle Networks 4220 boasts advanced threat detection and mitigation technologies. The platform utilizes deep packet inspection and real-time analytics to identify and neutralize potential threats before they can compromise the network. This proactive approach to network security ensures that sensitive data remains protected from cyber-attacks and intrusions, giving enterprises peace of mind.

Moreover, the device is designed for easy scalability. Organizations can effortlessly expand their network infrastructure as their needs evolve, without requiring extensive reconfigurations. The 4220 supports both wired and wireless connectivity, making it adaptable for various environments, from small offices to large enterprises.

Another notable feature is its user-friendly interface, which simplifies network management. Administrators can easily monitor network performance, manage configurations, and troubleshoot issues through an intuitive dashboard. This reduces operational overhead and allows IT teams to focus on strategic initiatives rather than routine maintenance tasks.

The Quick Eagle Networks 4220 also integrates seamlessly with existing IT ecosystems. Its compatibility with various third-party applications and services empowers businesses to implement tailored solutions that meet their specific requirements. Additionally, the device supports remote management, enabling IT staff to maintain oversight and control from any location.

Overall, the Quick Eagle Networks 4220 is a comprehensive networking solution that combines advanced technologies with practical features to support the dynamic needs of contemporary enterprises. With its exceptional performance, enhanced security, and ease of use, it stands out as a reliable choice for businesses striving for operational excellence in an increasingly digital world.